Canyon Spectral:ON Water Bottle Adapter for Fidlock YT Thirstmaster 5000
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for Canyon Spectral:ON to use YT Thirstmaster 5000 Water Bottle
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 73
- Makes
- 0
- Views
- 952
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Canyon was sold out of their proprietary water bottle cage so I came up with a solution to use my YT Thirstmaster 5000 Bottle from my YT Izzo.
I remixed this adapter from Bikernickmn: https://www.thingiverse.com/thing:6340762
I made it long enough to accommodate YT's proprietary Fidlock base plate. I also switched it to use threaded inserts because I find them much more convenient than nuts.
I really like the Izzo bottle because it is uses the Fidlock system so it never falls off in the rough stuff. The YT bottle has a higher capacity than anything Fidlock makes and in a shorter footprint.
Here is what you need to complete it.
1x Mx12mm Button head screw https://www.amazon.com/dp/B095YQ9W7C
2x M5x8mm Button head screws https://www.amazon.com/dp/B095YQ9W7C
2x M5x20mm (or 18mm) Button head screws washers (washers optional) https://www.amazon.com/dp/B095YQ9W7C
2x M5 Threaded Inserts: https://www.amazon.com/dp/B08T9W17CR
YT Thirstmaster 5000 Bottle Set (Includes Bottle, Fidlock TWIST Bottle connector, YT Fidlock Mount)
(FYI the bottle alone does not come with a Fidlock TWIST bottle connector)
US Link: https://us.yt-industries.com/products/parts/izzo/mk1-2020-current/338/thirstmaster-5000-bottle-set-izzo-mk1-szepter-mk1/
EU Link: https://www.yt-industries.com/products/parts/izzo/mk1-2020-current/338/thirstmaster-5000-bottle-set-izzo-mk1-szepter-mk1/
I printed in ASA because I had it but I imagine PETG would be just fine. It should be strong enough for PLA but be careful with that outdoors in hot climates.
The bottom two holes are a bit snug so you may need to drill them out.
I have included a sliced version that enlarges the bottom two holes so you should not need to enlarge them with that version.