1 / 3
Ikea Alex Drawer Connector / Combine 2 drawers into 1 — image 1
1 / 3

Ikea Alex Drawer Connector / Combine 2 drawers into 1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adjustable drawer connect to connect 2 Ikea Alex drawers into 1.

Rating
5 / 5
Likes
90
Downloads
185
Makes
0
Views
2,764
Reviews
2

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

I wanted to combine 2 Ikea Alex top drawers into one for the depth. This will allow storage of tall items and make them more accessible as the drawer slides are not full extension. They can also be used with any other 2 drawers, but you will need to manually align them. You will need a minimum of 2 per drawers, but I would recommend 4 instead so that the drawers are supported when you remove them from the slides for whatever reason. 

Printing Recommendations:

  1. Material - PLA is fine
  2. Infill - 15%
  3. walls - 3
  4. Screws used for mounting: #6 screws, 3/8" long (M3.5x9.5)

Installation Instructions

  1. Use the drawer rails as your guide. Pre-drill and mount the bottom holes first.
  2. Pre-drill the upper holes. Give yourself room for adjustments between upper and lower drawer faces. Mount the top holes
  3. Repeat on the other sides.
  4. Repeat on the rear side should you choose to install 4/drawer.

Looking to add drawer pulls to your Ikea Alex? see my remix below

Ikea Alex Cabinet Drawer Handles - Remix by Jazz | Download free STL model | Printables.com

Tags