1 / 1
FGC-6SF parts set for FGC-6H and FGC-6BL parts set GBB airsoft FGC-9 replica — image 1

FGC-6SF parts set for FGC-6H and FGC-6BL parts set GBB airsoft FGC-9 replica

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

the select fire update package for H / BL

Rating
0 / 5
Likes
18
Downloads
235
Makes
0
Views
1,759
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

2-11-2025

BL SF bolts have been updated to work with the new stronger disconnect that also makes it possible to do reloads when the bolt rest against the disconnect
 

all the files have been moved to zip files!
----------


15-10 2025
3DN-SF nozzles and bolts added

-------------

11-08-2025
M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt

-------------

22-12-2024
KWA / KSC bolt have been added

__

11-10-2024
M5 nut lower have been added. for a stronger connection

it will use a 30mm long M5 bolt with 3d printed grips
-------

9-10-2024
brass insert lowers have been updated to a 4.15mm hole

__________


13-09-2024
TM G 18c bolt added

_____

 



15-5-2024
all SF full auto disconnect parts have been updated. there was a error in the frame that made it wobble effecting the FA sear. both parts need to be replaced

_______________________


the BIG 2024 project update status: complete

----------------

the parts list and the documentation to get started can be found here the link to the new manuals can be found here

https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing

 

---------------

 


------------------------------

added a AR-15  trigger spring compatible  SF trigger option

trigger and semi disconnect is updated to prevent binary fire

the Full auto sear part is updated, this can be placed in the frame original FA sear frame
 

all Bolts have been updated and more nozzle models have been added
__________________________________


A BIG 2024 project update is a view weeks away!!!
so my recommendation is to put your build on hold.

Barrel / UNW hop up unit will be updated
Bolts will be updated
bolt front caps

internal pars will be updated

and the manual

why? Better FPS/joule out putt
a more easy and relabel build
better nozzle support
nozzle spring guide (is all ready a beta thing)

For beta user keep in mind that I’m working and testing parts that are newer then the beta parts.

When this update is done and it’s confirmed that it is good update. Then there will be 2 alternate models added over time. The stingray, and partisan 6 edition of this project. In a H and BL version

 

________________________________________________________

 

(beta note)
keep in mind at this moment this is a beta. meaning the 3d parts should be considered final. however with the new lock pin fire pin assemblies do I have to redo all my testing. so spring setting may chance after those days of testing are completed… also it does have a clear manual or now. but I will try to make some video’s when i have time explain this set further until I get around working finishing this package.


__________________
2-3-2024
new updated disconnect arm added for H based builds

for hammers and fire pins look at

https://www.printables.com/model/677286


_________________
compatibility

FGC-6H or FGC-6BL

you will need the base set from a FGC-6H or BL for this set
https://www.printables.com/model/557325-fgc-6h-mki-mki-hybid-mkii-mkiisd-1-on-1-airsoft-re


https://www.printables.com/model/400298-fgc-6bl-mkimkii-bolt-lock-starter-kit-gbb-airsoft-

 

it’s also highly recommended to use the lock pin fire pins assembly that is currently a beta
https://www.printables.com/model/677286

keep in mind that some buttstock’s options might not be compatible with this bolt. this still needs to be checked at this time.

these bolts can also be used for semi auto H or BL builds

__

how to use it

do keep in mind to only use the selector once the hammer is pushed down. other wise you will damage the it.

__

difference between a SF lower and the H(BL) lower 
the only difference is that is got a cut out of the selectors so it’s more easy to got from full auto to semi auto. this can be done on a H(BL) lower but you will find that is not easy since you don’t have room to place your finger above the selector.

——
you can use this set in a view ways

the safe and full auto option
you can use it to make a H or BL model that can shoot only full auto 
the benefit of this can be that the safety selector is a bit stronger that way

what do you need to remove from your H or BL
the semi auto disconnect part and it’s spring

what do you need to replace with the SF set
BOLT
spring cap
Full auto disconnect
hammer


the safe, semi auto and full auto option
what do you need to replace with the SF set
BOLT
spring cap
Full auto disconnect
the entire Fire control group
fire selector
hammer
lower (unless you don’t mind it’s harder to get the selector of the FA setting)

——

movie link:

FGC-6 turn the H or BL into a select fire model with the FGC-6SF parts set

 

FGC-6 turn the H or BL into a full auto model with the FGC-6SF parts set

 

UNW FGC-6H FGC-6BL FGC-6SF Lower parts check for low friction movement

 

FGC-6SF what to expect pre release of the 3d printable GBB closed bolt select fire airsoft replica


a look at the prototype models:
 

FGC-6SF 3d printable GBB closed bolt select fire airsoft FGC-9 replica prototype


FGC-6SF 3d printable GBB closed bolt select fire airsoft: prototype test fire Day 1
 


—-
materials needed (this text here will be updated until there is a official manual or parts list

links for that can be found here:
https://drive.google.com/drive/folders/1ppDKxs2tu0rj9MaRVWfpiozERtG7PVGz?usp=sharing

https://studio.youtube.com/video/62I4DyG8WqM/edit

 

hammer: parts are the same as for a BL / H
trigger: fallow the compression trigger parts of a BL / H
bolt spring: parts are the same as for a BL / H

full auto disconnect 
1x spring:0.4mm wire, 5mm OD, 15mm long.
1x M2 bolt 12mm long

anti bounce bolt weight
10mm od metal rod 40mm long

-

note to printable users: you have to scroll down and also download all other files! to get you hands on the PDF’s

—

print settings:
0.2 layer height should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

for the lower I would use a brim on both the outside and inside the part just to prevent it from warping

Tags