1 / 2
Ortur Laser Master 3 LE - base, feet - 50 mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the need to raise the base of the laser above the surface by 50 mm (f.e. rotary fixture).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Model is design for Ortur Laser Master 3 LE
(note: not tested with Ortur LM 3)
For the need to raise the base of the laser above the surface by 50 mm (f.e. rotary fixture).
The tool assumes that rubber pads are glued to the base of the laser - so there is a 1 mm recess for better insertion of the leg including the rubber.
The laser plate is made from 1,5 mm steel, on my moder there is 1,0 mm support (+ whole surface of leg).
I used 10% fill for the print, 0,3 mm layer. No supports.