1 / 2
Honda Acty HA4 Front Differential Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for the spot where the prop shaft connects to the front diff.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a cover for the connection point between the front diff and propshaft on a Honda Acty.
I removed my propshaft to disable 4wd, and I wanted to cover up the connection point on the front differential.
Use M8 20mm bolts with washers to attach.
Check out the 3mf file for print settings. Essentially you want 9+ perimeters, 16 bottom layers at .2mm layer height, and around 8 top layers. I used ABS, but any other tough and temp resistant filament should do the job. I wouldn't use PLA.