Artillery Genius Pro upgrades & accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5015 fan duct, nozzle cleaner, leg, extruder cover
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 187
- Makes
- 0
- Views
- 2,062
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
If you have any question leave a comment and I will do my best to answer
Nozzle cleaner
The hole for the poly is a bit under sized, use some force to convince it to go in.
klipper config in the files.
Hardware:
Nema 17
Stepper driver AT2100
Poly 16 teeth bore 5
1 m3*30mm for the end stop
1 m3*20mm screw, lock nut and washer.
- 0.2 to 0.44 layer height with 0.6 nozzle
- 2 perimeters
- 10% infill
5015 Fan duct
On my fan I had to remove with a knife one of the clips on side of the fan to make it fit in the duct.
Hardware:
2 m4 threaded inserts
2 m4*20mm screws
2 m3*8 screws and washers
- 0.2 layer height
- 2 perimeters
- 10% infill
Extruder cover
Hardware:
You will need a small piece of foam or rubber behind the ribbon cable
- 0.2 to 0.44 layer height with 0.6 nozzle
- 2 perimeters
- 10% infill
4020 Back bracket
Will need to tap M5 threads in the 2040 extrusion, the bracket will hold 5mm thick foamboard.
Hardware:
2 m5*10mm screws
- 0.2 to 0.44 layer height with 0.6 nozzle
- 2 perimeters
- 10% infill
Genius pro Leg
Nothing to add, just print it and stick it in, no hardware needed.
- 0.2 to 0.44 layer height with 0.6 nozzle
- 2 perimeters
- 10% infill