Super Mario Wall Art & Decorations Variety Pack

My son is really into Super Mario, right now, and I wanted to make him a unique Christmas present for his room! I got a bit carried away with the variety but the end result is fun and he absolutely loved them.

In order for these to really standout on the wall I highly recommend printing them on a textured build plate. The gold and silver silk filaments I used stood out and looked amazing using textured, but would look very dull if you use a flat surface. There are slots on the back of each of these that should fit command strips in to allow flush wall mounting.

Note 1: Regarding some of the prints having a 4th layer that is mostly in white filament: I mostly print with Overture PLA and have noticed that a lot of their colors are actually fairly opaque. In order to make the colors pop I would print a layer of white behind the 3 layers of color and it would work super well. As long as you print in at .2mm height this should happen automatically for you.

Note 2: A note about the “Super Mario” Text Logo in multiple colors: As mentioned above white was often needed for some of the more opaque colors to pop but this print already uses all 5 colors that most multi color systems support. I simply changed the yellow after its third layer of printing to white to make this work. I am sure you could modify the slicer to prompt for this if you want to.

Feel free to tinker:

• Text Wall Arts: https://www.tinkercad.com/things/4WMThgwTar9-mario-text-wall-art 
• Hats Wall Arts: https://www.tinkercad.com/things/9McFg7vDcKt-mario-hats 
• Crowns Wall Arts: https://www.tinkercad.com/things/aL5z2fHg7YT-princess-crowns-wall-art 
• Power Ups Wall Arts: https://www.tinkercad.com/things/anL6B0qHGGU-mario-power-ups-wall-art 

Print instructions

Printer Brand: Prusa

Printer: I3 MK3S-R

Rafts: No

Supports: No

Resolution: 0.2

Infill: 15-20%