Mk4 Bin / tray set (L & R)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.79 – €9.52 net (excluding VAT)
For file: LeftBinV1Dual_Mk4_0.4n_0.15mm_PETG_MK4.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.66 excluding VAT (range midpoint).
- Weight reported by the author
- 100 g
- Print time reported by the author
- 9.38 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Contoured side trays that closely fit the Prusa Mk4 stepper geometry to maximise storage space and always capture waste
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 221
- Makes
- 9
- Views
- 1,266
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
While using the Mk3 I also used the excellent Prusa Mk3 bin created by mkoistinen. The Mk4 has very different Z stepper mouldings. Whilst taking inspiration from mkoistinen’s design I have created a pair of side boxes that contour to exactly fit the new stepper mouldings. This maximises the volume of the side boxes and also ensures that no waste finds its way past the bin (on the right hand side).
The side box design allows for the worst case scenario – that prusa have put the cable-tie ‘heads’ on the front of the main metal support not the rear - I had one forward & 1 back! (I know, I could have flipped the tie, but there are non-moveable bolt heads to deal with as well). That is why the rear lip is in my design. The hook has been beefed up from the original. Only 1 hook is required on each bin, because the rear is pretty much an interference fit.
If using the gcode file to print be aware that this creates support for the hook and this needs careful removal (I used a knife between the hook and the box to stop the hook flexing while removing).
STL’s are also provided. The hook requires a small enforced support to be created if you are working from the stl. Gcode incorporates 20% Gyroid infill and gives the option of printing in single colour (mono) or dual colour (as pictured).