Bambu Printers Cable Chain PTFE Clip ABS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add an addition clip to the print head cable chain to secure the PTFE tube. No Adhesive required
- Rating
- 5 / 5
- Likes
- 97
- Downloads
- 658
- Makes
- 14
- Views
- 2,812
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adds an addition clip to the print head cable chain. This clips very snuggly to a link and wont slide when fitted. It also wont totally restrict the pivoting of the link its clipped to. It is best if positioned 6 links from existing clip towards the print head. When using an LED Riser for led strips, there is very often a rattling scratching noise coming from the top of the printer. This rattling is the PTFE tube vibrating very fast against the glass top, as the LED riser puts distance between the PTFE tube and the glass top and the PTFE tube is flexible. Without a Riser, the tube normally just glides against the bottom surface of the glass tops. Before clipping onto the chain, cut off the supports with a knife or side cutters. DO NOT enable supports in Slicer as i designed them to be as one for print purposes, but with easy removal.