1 / 2
Command Strip Spice Rack for MasterFood, McCormick and other common brands of spices
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
use 4pcs of medium command strip, able to print within 220x220 print area without support
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 86
- Makes
- 0
- Views
- 585
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
most small spice bottle are 40mm or 45mm diameter.
Here is my setting for this print:
material : any should works fine, I have printed in PETG
wall count : 2
top/bottom layer count : 4
layer : 0.2
support : None
raft/brim : None
Infill : 12% Gyroid
if possible, use a flat, non-textured bed, so the command strip can work in better condition