1 / 1
Mr. Longarm extension pole Swiffer adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allowed me to finally dust the chandelier!
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 82
- Makes
- 1
- Views
- 418
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in PETG to allow a little flex.
This part uses the ‘fork’ from a handheld Swiffer to hold the dusting part. It's a press fit so adjust as necessary if it's too tight or loose. My particular extension arm is a Mr. Longarm model with a tapered thread so this screws on very snugly.
There are a total of five positions you can set using a ½" bolt and wingnut. The Fusion 360 .f3d file included if you need to adjust to another bolt size or something.