Gain knob barrier for UMC1820
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.23 – €1.50 net (excluding VAT)
For file: umcshield v1_PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.36 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 58.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
prevents accidental change of input gains
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
I have made a microphone array for measuring polar patterns and whatnot, and it is important that the gains of all the mics are matched. Tuning them is an elaborate procedure, yet it is so easy to bump a knob off of the tuned position, and not even notice.
This barrier essentially prevents one from adjusting the gains.
To install, first, pull off all the handles. Then you'll need to drill holes for screws. For M3 screws, use 2.5mm drill. Use the shield as a stencil to drill the holes. It may be a good idea to dremel slots on the shafts of the pots to adjust the pots with a screwdriver without taking the barrier off.
Attached FreeCAD file contains the parametric model for the barrier. You'll need to install Lattice2 addon to use it. The default state is a barrier for all 8 channels; you can reduce the number of channels covered by modifying LinearArray's Count property.