Shapeoko Dust Boot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I required a more stable boot than the ones provided on here. It also uses straight pathways for the nylon bristle…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 46
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I required a more stable boot than the ones provided on here. It also uses straight pathways for the nylon bristle brushes. This allows easy swap out if they are damaged and also easy install in the beginning.
Required:
8 - 0.125x3/16" set screws. https://www.mcmaster.com/91375a123
1 - 2' Tight-Seal Strip Brush with Nylon Bristles, 1/8"w x 1/8"h backing. https://www.mcmaster.com/74405t3
1 - M5x5 screw or longer to anchor the boot to the router.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50
Filament: Clariant PET-G Black
Category: DIY