Sky Watcher Quattro 200p Focuser Light Leak Blocker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A gasket to fit around the focuser tube to prevent light from easily making its way in.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 79
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Much like my other model for blocking light leaks near the primary, this model is to address the area around the focuser where it is very easy for light to get to the camera sensor. The black ring that holds the set screws for the 2" tube will thread off, allowing this gasket-like contraption to be installed. Reinstall the set screw ring, and use as normal. Fit the gasket flush with the focuser body once focus is dialed in.
Note: this fits over the track that moves the 2" tube in/out of the focuser. There is buffer for focusing, but the gasket will not work as designed with the focuser too far in or out. This design is centered around prime focus for my setup, but may require some adjustment for others.
Suggest printing with black TPU. A flexible filament will make installation easier, but is not required. Fit is snug. I printed with enough perimeters and top/bottom layers for a solid print.
