1 / 8
Retro 7 Segment Clock (Complete)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cool LED clock.
- Rating
- 5 / 5
- Likes
- 99
- Downloads
- 256
- Makes
- 4
- Views
- 3,615
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Notes:
- Walls are multiples of 0.6mm, so I suggest printing these using a extrusion width/wall width of 0.6mm/1.2mm. 0.5mm/1.0mm or smaller will increase print times and give you weaker parts.
- Before printing all the diffusers I suggest printing the single one and test if it fits nicely. Don't squish the first layer too much on the frame or diffuser files!
- After wiring the led strips I strongly suggest running the test-INO before completing everything (rtc, arduino, case, power wiring and so on).
- Of course you can use other led strips as long as they aren't much thicker, 10mm wide and you know how to program them
- The case will fit an Arduino Pro Mini OR Arduino Nano. No usb breakout as I'm only using pro minis for stuff like this...
Requirements:
1 Arduino (Nano or Pro Mini)
1 RTC module (DS3231)
99 WS2812 LEDs, 60 leds/meter, 2x 47pcs, 1x 5pcs
2 button switches, 6mm
1 resistor (300-500ohms)
24 screws (M3, 6-10mm)
lots of wires
Working Arduino IDE
Basic knowledge of what you're doing
Print Settings:
Rafts:
No
Supports:
No
Resolution:
0,20 - 0,30
Infill:
0% - 30%
Videos:
Credits: