KLEENMAID Heavy Duty Dryer - hinge replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement hinge for a KLEENMAID Heavy Duty Dryer
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Replacement hinge for a KLEENMAID Heavy Duty Dryer.
The pins on the metal hinge of my KLEENMAID Dryer broke off so I decided to 3D print a replacement.
Requires reusing the plastic hinge parts on the door, if they are broken this print will not replace those.
Also, this print requires a 10cm long 4.0mm diameter metal dowl/pin (or smaller) to be push fit into the hinge, I used a 3.7mm diameter nail (with the ends ground off) for the pin with the 4.0mm hole print which was a very tight fit in generic ASA filament.
I printed this using generic ASA filament with 0.20mm layers, 6 walls, supports and brim with a MK4 Input Shaper printer.
Print in the original orientation for maximum strength!!!
I have included files with different size holes ranging from 4.0mm - 4.3mm so you can get the right clearances for your dowl/pin.
I have also included the Fusion 360 design file and a STEP file in case the included sizes don't fit and need to be modified.