TGC Slabs stand holder Base 3 (3 cards)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print your own TGC Slabs stand (initially made for Hermicraft Alt-Art collection). Version Base 3 slots (3 cards).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print your own TGC Slabs stand (initially made for Hermicraft Alt-Art collection).
Version Base 3 slots (3 cards).
There is two sub-release available :
- Stand-3-LIGHT → With a depth of 6.80mm in each slots
- Stand-3-LIGHT-TIGHTER → With a depth of 6.40mm in each slots
You'll also find some “Spacer”, only needed if the card move too much in its slot (you can also use some pieces of paper).
I also included two "Test print" models to check the result with only one slot :
Stand-TestPrint-LIGHT → With a depth of 6.80mm for the slot
Stand-TestPrint-LIGHT-TIGHTER → With a depth of 6.40mm for the slot
Print Settings
- Printer brand:
Creality
- Printer:
CR10S PRO
- Rafts:
Doesn't Matter
- Supports:
No
- Resolution:
0.20mm
- Infill:
20%
- Filament brand:
NA
- Filament material:
PLA