1 / 4
Stacking can tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple tool for stacking cans that weren't designed to be stacked.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Here's a simple tool for stacking cans that weren't designed to be stacked.
The size is designed for cans with a diameter of ~73 mm, and is suitable for cans fitted with an opening device without a can opener (so it can be used with all types of can).
Designed with this trendy hexagonal pattern that everyone is sticking everywhere 🤣 !
If you don't know what to do with the 5 meters of spool end you have left, you know what to do 🤙.
Printing tips :
- 0.4 mm nozzle
- Layer height: 0.2mm
- Wall loops : 2
- Bottom and top shell layers: 4
- Sparse infill density : 15%
- Supports needed (on Orca, use Support Painting, highlight 30° overhangs, activate overhangs only and use fill tool).
Then, enable support, Type “normal (manual)”.
Filament :
- about 5.39 m of META PLA, Hyper PLA or PETG.