Pegboard 5-inch/127mm Sandpaper Disc Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
8-slot 5-inch disc sandpaper holder for 1in/2.54cm pegboard. No supports required.
- Rating
- 4.8 / 5
- Likes
- 235
- Downloads
- 1,254
- Makes
- 5
- Views
- 4,398
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the idea of this design
…but I wanted one with wider and more more slots and would not require supports to print.
So, I created this design which has 8 slots to fit standard 5-inch/127mm sanding discs. I made the walls have hexagonal cut-outs in order to require less filament, but remain stable.
In addition, this design does not come with pegs included in the body of the model. Instead, it uses the “clip-in” style pegs made popular by this design.
There's an array of 3 x 5 inserts on the back that can be used to work with whatever peg space you have available. Pegs files are included and come from the tape storage model above. I have included the various sizes so you can print whatever size is best for your pegboard.
Print Settings as pictured:
Filament: PETG
Layer height: 0.2mm
Infill: 15%
Measurements:
Height: 5.07in/128mm
Width: 5.43in/138mm
Depth: 5.47in/139mm
Slot size: 0.59in/15mm
I would suggest printing it with the back with the holes in it facing down on the plate, which is the current orientation. Does not require supports when printed this way. The pegs can then be printed separately.
If you enjoy this model, you may like my other pegboard designs (all free).