Foreskin Mold Restoration - Willy Warmer aka Manhood, Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glans protector
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 127
- Makes
- 0
- Views
- 4,599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have tried all the options on the market: the manhood, the oxball, and many others
They do not give you supple glans, if they say they do, it's probably a lie.
I have experimented and designed a realistic willy warmer that will dekeratinize your skin without restoration, downside to that is that you have to wear it constantly but if you want to at least experience the reaffirming euphoria then go ahead and give this a go.
The model could use some improvements so I have attached the CAD file.
Instructions:
IMPORTANT! You must use a platinum skin safe silicone I used this one:
Ecoflex 00-50:
https://www.benam.co.uk/ecoflex-00-50
Amazon:
You can also buy this for colour:
https://www.neillsmaterials.co.uk/product/key-pigments-silicone-pigments/
Seal the top hole with the lid that is in the file
Pour the mixed silicone ( you will need about 2-3 spoonfuls of each part A & B)
Then insert the penis mold in, don't worry if there is spillage but try to have a tight seal with a clamp or rubber bands
Flip the mold over and remove the lid
Start tapping it a lot to remove air bubbles, if you have a vibrating device or a vacuum sealer use that
Feel free to top it off from the small hole
Flip it back over so that that the base of the penis is facing up and the tip facing down (very important)
Leave it to dry for about 2 hours
Unseal the mold with a bed scraper, be very careful not to puncture the mold.
I am not an expert, I am sure there are better ways to do this and a better design but I just learned CAD, modeling and casting just to do this put of frustration haha
You can wear it for24/7 use, add a bit of panthenol oil to speed DK in about 1-2 days
Check my realistic model here: https://www.printables.com/model/682548-realistic-foreskin-mold-restoration-willy-warmer-a