1 / 1
Blockface modular stamp box with INSET logo instead of extruded
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blockface modular stamp box with INSET logo instead of extruded. Also separated top and bottom. M5 x 20mm bolts.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 57
- Makes
- 2
- Views
- 191
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
From the original I've changed the logo to inset. Based on comments I removed an interference on the joints and increased their size significantly. I added a small gap cover extrusion to the bottom as well. M5 x 20 screw run the screw through the bottom to cut threads into the plastic remove then insert the top and reinsert screw then add a nut.