1 / 3
FPV Drone Wall Hanger (3M Command Strip) [New Design available]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FPV wall hanger with a flat surface designed for 3M Command Tape.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 96
- Makes
- 1
- Views
- 512
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
V2 is now available here
Features
- Wall hanger for 3" or larger quads (check your dry weight vs single 3M Command strip max load)
- Uses single 3M Command Strip
Print Settings
- Printer: Creality Ender 3
- Filament material: PLA
- Resolution: Default or finer
- Wall Ordering: Outside to Inside
- Supports: No
- Infill: 40%
- Infill Pattern: Hexagonal/Tri-Hexagonal
- Nozzle Temp: 220°C
- Bed Temp: 50°C
- Print Speed: 100mm/s
- Rafts: Doesn't Matter
- Notes: Depending on your first layer quality, some sanding and cleaning might be needed for better adhesion. After sanding, rinse and dry. Use any tape to stick off excess dust/particle before applying 3M Command Strip