1 / 1
6 out ANL Fuse terminal/holder/block
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ANL fuse holder for car audio
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
ANL fuse block/holder/terminal
Designed to use either 1/8in or 1/4in thick x 2in wide aluminum flat stock for the busbars
5/16in x 1in bolts (thread pitch your choice)
1/4in x 5/16in bolt (thread pitch your choice)
The top busbar is 2in x 6.575in long
Output busbars are 2in x .95in long
Place the flat stock in the fuse plate and mark all the holes.
The larger holes are to be drilled and tapped for a 5/16in x 1in bolt.
The smaller holes are to be drilled and tapped for a 1/4in x 5/16in bolt.