(open files) Gun fan barbebue Pisotlet ventilateur barbecue EN/FR
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EN: Hello my father asked me to make him a small fan to make the wind on the barbecue to light the flames more easily…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
EN:
Hello my father asked me to make him a small fan to make the wind on the barbecue to light the flames more easily
So I made him this little rechargeable barbecue fan gun ^^
TESTED AND APPROVED ^^
You will need
- a 10mm momentary switch
- 18650 battery
- a 12v 80mm pc fan
- a dc dc MT3608 booster to raise the battery voltage to 12v
- a TP4056 charging module for the battery
-6 screws of 3x30mm and 6 self-locking nuts
Use the photos as assembly instructions if you need them
Do not forget to pass the fan wires through the holes of the case (of the two pieces) before soldering them
To hold the TP4056 module I used a stick glue gun
Go there on the quantity
There it is, thanks
FR:
Bonjour mon père m'as demandé de lui faire un petit ventilateur pour faire du vent sur le barbecue pour allumer les flammes plus facilement
Je lui ai donc fait ce petit pistolet ventilateur pour barbecue rechargeable ^^
Tésté et approuvé^^
Vous aurez besoin de
- un interupteur momentané de 10mm
- un accu 18650
- un ventilateur 12v de pc de 80mm
- un booster dc dc MT3608 pour élever la tension de l'accu à 12v
- un module de charge TP4056 pour la batterie
-6 vis de 3x30mm et 6 ecrous autobloquant
Utilisez les photos comme instructions de montage si vous en avez besoin
N'oubliez pas de faire passer les fils du ventilateur dans les trous du boitier (des deux pièces) avant de les souder
Pour tenir le module TP4056 j'ai utilisé un pistolet à colle en baton
Allez y sur la quantité
Voila merci
Category: Sport & Outdoors