Sunflower Clock
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.18 – €0.22 net (excluding VAT)
For file: hour_hand_0.2mm_PETG_MK3S_14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.20 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 13.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Based on original design by George Nelson
- Rating
- 4.864 / 5
- Likes
- 888
- Downloads
- 1,950
- Makes
- 57
- Views
- 15,535
- Reviews
- 44
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
Printed in PETG in various colors , some parts 0.3mm layer to reduce time ,hands 0.2mm layer, all parts without supports .
The link between petals are printed using Tansparent Petg , needed to avoid petal movements
The total width of the clock is about 70cm
The total print time is around 60 hours
Clock mechanics used : JUNGHANS W838 or UTS 800 , axle length 16mm
Made on my Prusa MK3S+
Happy printing :)
As requested , here the instructions :
1) print the clock body
black color, no supports , PETG , 0.3mm layer, infill 10%
2) print 4 main petals , for 3, 6, 9 and 12 o'clock
strong colors , infill 0%, PETG, NO SOLID layer on top , NO SOLID layer on bottom
take attention to place in the clock body slot , the 12 o'clock is placed over the clock hook !
( I choose the color blue and red )
3) print the remain 20 petals and place them in the slot (see image)
4) print twice the hour_placeholder.3mf to obtain 12xHour Placeholder
PETG , white color
put them in the petals . The rear view is shown in the image
5) print twice the link.3mf to obtain 24xLink
PETG Transparent ( to stay hidden )
this part is mounted in the back side , necessary to block each petal, this avoids the oscillations
(see the image )
6) Print the hands and mount the clock mechanics as indicated by the mechanics manufacturer
