1 / 1
Split Flap Drum Magnet Increased Tolerance
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds additional tolerance to the magnet mount within 'Flap Drum Inner' making the magnet easier to fit.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 122
- Makes
- 0
- Views
- 642
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The original Split Flap design is a masterpiece of design and engineering. However, I couldn't get my 2x1mm magnet to fit within the inner drum without breaking things. I've increased the bore of the magnet hole to 2.4mm which should be plenty for anyone. You can then use a dab of superglue to secure the magnet in place.
Simply print ‘FlapDrumInnerTolerance.stl’ instead of ‘FlapDrumInner.stl’ using the same settings you would have before.