Cord Hook for ProTeam ProCare 15XP Upright Vacuum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement cord wrap hook designed for, but not limited to, ProTeam ProCare 15XP upright vacuum cleaners.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings:
Filament: Designed for PETG
Infill: 25%
Layer hight: First layer 0.2mm, Remaining layers 0.15mm
Nozzle: 0.4
Nozzles temp: First layer 235c, Remaining layers 245c
Bed temp: First layer 85c, Remaining layers 90c
Supports: Yes, Rectilinear
Print time: Approximately 1 hour 59 minutes
Filament required: Approximately 3.42m
Works on 6 inch beds
Works on not heated beds, with the inclusion of a brim
These are the settings that I printed with and know work, but I encourage you to experiment with the settings in your slicer of choice.