QLC+ keypad
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.70 – €5.75 net (excluding VAT)
For file: qlc-keypad-2_0.2mm_PLA_MINI_4h58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.23 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 4.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Custom HID/macro keyboard for 7 MX switches
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Enclosure (base + switch plate) for a custom macro pad.
I built it specifically to control stage lights with QLC+, having my most used Scenes available on a separate physical keyboard.
For keycaps, I used “Ultimate OEM Keycap Generator” and SVG icons. Icons were embossed, then filled with white paint, then I sanded the paint overflow off with 400 grit sandpaper, and sealed with transparent epoxy/glue. For programming, I used QMK in MIDI input mode.
Needs 5x 2mm (OD 3MM) threaded inserts, 2x M3x14 bolts, 4x M3 washers, 2x M3 nuts.