toothpaste reel-robust
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a more robust toothpaste reel.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 267
- Makes
- 2
- Views
- 760
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution
I used one of these for 2 years before it was beginning to fail, so I designed a new toothpaste reel with thicker, stronger, and bigger components, made to be printed in optimal positions for strength. after 36 months I have seen very little evidence of creep.
print in the positions shown in the prusaslicer screenshot.
the length of the slot in the body is 70mm/2.7in long.
pla+/petg/any CF filament.
0.3mm of tolerance
3-4 shells
25%or more infill
temp-235c for PLA
print the shaft/handle on the flat section located on its side, it should be flat, printing vertically will compromise strength.
--update, fixed import model unit size so it's not microscopic--