1 / 13
1/32 Dirt Late Model Slot Car (body and chassis) — image 1
1 / 13

1/32 Dirt Late Model Slot Car (body and chassis)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Original design dirt late model body and chassis for 1/32 slot car racing. I designed the parts using Autodesk…

Rating
0 / 5
Likes
37
Downloads
325
Makes
0
Views
2,278
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Original design dirt late model body and chassis for 1/32 slot car racing. I designed the parts using Autodesk Inventor and Fusion 360 from the proverbial "blank sheet" just to see if I could come up with something workable. It turned out better than I expected so I wanted to share it here (and in the forums at homeracingworld.us). I started the design using the dimensions from a Craftsman Late Model Series rulebook I found online (no idea if they were the current rules or not). The final car is not exactly to the rulebook, but it's pretty close to true 1/32 scale.

Body and chassis were designed together so the fit really well with each other. The chassis uses a standard slot.it inline motor pod.

I found that printing the body in multiple pieces and gluing it together gave me the best results. I used hot melt glue with very good results (so far).

There are two version of the body and chassis, 2 post and 3 post. The 3 post body has two mounting post locations in the front and one in the rear (which on you print is personal preference, just make sure to print the matching body/chassis).

I print everything in PLA and it works well. The chassis and the body seems to be durable enough to last quite a long time.

Body: Print upside down (large flat area against the build plate)

Supports: from build plate only

Infill: 100%

Layer Height: 0.2

Walls: 3

Interior: Print right side up. I modified my g-code for a color change at the point the roll cage starts printing.

Supports: none (the roll cage will be a bit stringy, but it's too thin to use supports)

Infill: 100%

Layer Height: 0.2

Walls: 3

Bumper: print upside down (ends of 'tubes' against build plate). be careful when removing supports as the tubes can easily snap.

Supports: from build plate only

Infill: 100%

Layer Height: 0.2

Walls: 3

Hood: print right side up

Supports: none

Infill: 100%

Layer Height: 0.2

Walls: 3

Air Cleaner: print ride side up. I just use a marker to color the top surface black to look like a lid. You could also do a filament change on this one if you wanted to.

Supports: none

Infill: doesn't matter

Layer Height: 0.2

Walls: 2

Top: print upside down

Supports: from build plate only

Infill: 100%

Layer Height: 0.2

Walls: 3

Spoiler: this is the hardest one to print because it's so delicate. I tried several different print orientations and settled on printing it vertical. Vertical takes the longest, but makes a nice looking part. Be extremely careful when removing supports (there is a lot of support material in this orientation) as it will snap at the 'end plates' very easily.

Supports: everywhere

Infill: 100%

Layer Height: 0.2

Walls: 3

Chassis: print right side up

Supports: ?? I usually print with supports, but I'm not sure they are really necessary except under the guide area. The supports under the guide area usually have to be sanded off with a Dremel. I never printed one without supports, so feel free to experiment and let me know how it works.

Infill: 100%

Layer Height: 0.2

Walls: 3

Creative Commons License

"Attribution-NonCommercial-ShareAlike CC BY-NC-SA

This license lets others remix, tweak, and build upon your work non-commercially, as long as they credit you and license their new creations under the identical terms."

Category: Hobby

Tags