1 / 9
Subbuteo Classic Goal Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Subbuteo Classic Goal Base Screw this down to your board (you can use tiny railway track self tapping screws
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Subbuteo Classic Goal Base
Screw this down to your board (you can use tiny railway track self tapping screws 1.4 x 10mm) and press the square Goal legs in, this set is from the late 1980's early 1990's
I made the fit tight and filed the legs slightly to get a good push-fit.
Added small countersunk holes along the back rail so the goalie doesn't keep snagging on the screw heads.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Category: Hobby