1 / 1
Death by Bridging
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a test to see how far your bridging can go. The numbers do not show on a 0.4mm nozzle. If using it, I would…
- Rating
- 4.667 / 5
- Likes
- 25
- Downloads
- 361
- Makes
- 4
- Views
- 1,566
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
This is a test to see how far your bridging can go. The numbers do not show on a 0.4mm nozzle. If using it, I would keep a careful eye on your print, as it could turn to string by the end when the bridging starts to fail (Mine made the entire run, but it was very stringy at 200mm).
With a 0.4mm Nozzle, and a layer height of 200um it takes about 1.25 hours to print.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
200
Infill:
15
Filament:
3DQF PLA
Category: 3D Printing Tests