1 / 2
Gridfinity Vase Mode Bin Divider with Fingerslide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Vase Mode Divider Bin with Fingerslide and stronger edges.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 291
- Makes
- 0
- Views
- 2,082
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Gridfinity Vase Mode Divider Bin with Fingerslide and stronger edges, with reinforcing ribs.
I would suggest using PETG for the bins and PLA or PETG for labels.
Print settings:
- nozzle: only use 0,4mm (was tested)
- layer height: 0,2mm
- vase mode: on
- Bottom layers: 4
Advice for printing labels:
- I have provided a file for the labels in a format supported by the popular Fusion 360 software.
- After reworking it to your liking, so that the letters do not stick out (which would prevent stacking), I recommend exporting the model in two parts.
- One we use as a standard model with the descriptions set as a shape subtraction modifier (e.g. Prusaslicer).
- And the other one with the description itself we give in exactly the same place as the cut letters.
- We generate a separate gcode for the description and a separate one for the labels with the cut out description.
- We print first the description and then for these descriptions uncut from the printer table of the labels.
VERY IMPORTANT: The gcodes must not interfere with each other!
Happy printing!