1 / 7
Sovol sv06 Spindle nut adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spindle nut adapter
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 43
- Makes
- 1
- Views
- 446
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Because I couldn't find a suitable replacement spindle nut, I built this simple adapter.
So I can install standard nuts. (TR8 x 4, with two thread starts) You only have to drill out two of the holes to 5mm if you get the standard one with a 16mm bolt circle, otherwise the screws won't align (Sovol bolt circle 17.5mm).
Here is a link with the spindle nuts I use: https://princore.de/products/trapezmutter?variant=39254414032995
what else is needed:
4 washers M3
4 M3 x 16mm screws
Category: 3D Printer Parts