Prusa XL PiCam/Y-Axis Mounting Point
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides a mounting point on the Prusa XL Y-Axis arm for a PiCam, or whatever.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Provides a mounting point for a PiCam on the Prusa XL Y-Axis arms.
Requires a 3030 T-nut and an M3x10mm socket head screw. If you do not have a T-nut you can print one of these, https://www.printables.com/model/10424-m3-drop-in-nut-for-3030-extrusion, which is what I used.
Simply hook around the top inside edge of the Y-Axis cover and snap it down into place over the cover. Secure to the 3030 extrusion with a T-Nut and M3x10 screw.
For the PiCam3 case used see: https://www.printables.com/model/686581
For the Pi3 case used see: https://www.printables.com/model/686646