Tenlog Extruder Cable Management Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated (04/10/21) - REDESIGNED and added the Filament Guides on the sides and also made two screw holes (one on each…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Updated (04/10/21) - REDESIGNED and added the Filament Guides on the sides and also made two screw holes (one on each side).
I wanted to better manage the Tenlog Extruder cables so I designed this cable holder.
I used M3 x 12 machine screws and M3 T-Nuts to mount this to the gantry, one on each side. The middle hole could be used but not necessary.
I used Tree supports to print. They broke right off after print and the print turned out great!
Enjoy!
Print Settings
Printer:
Tenlog TL-D3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
25%
Filament:
3D Fuel PLA PRO (PLA+)Iron Red
Category: 3D Printing