1 / 7
Buildable Christmas Pine Tree - fits on all Prusa
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pine tree designed to have a bricky look
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 182
- Makes
- 3
- Views
- 1,204
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The tree is 10 inches / 25 cm tall and weighs about 310 grams and takes 10 hours to print on a Prusa MK4. All parts fit on the Prusa Mini (or any other printer with a 180x180 bed) but the longer sticks have to be rotated 45 degrees.
Print "bricky_tree" first. You can set “Solid infill threshold area” to 550 for extra strength.
Then print “test_sticks” to see which one gives you the best fit. You can then print the selected stick from “full_sticks”, but make sure to use 3+ perimeters.
The 9.7 stick should be the best for most printers.