1 / 6
MINIWARE MHP30 support stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Description
A small stand for handling larger PCBs on a MINIWARE MHP30. There is a hole in the middle for a 10 x 50mm wooden stick.
I printed the base and screw from PETG and the feet from TPU (FLEX) material.
Additional Parts
- 1x wooden stick (10mm wide, approx. 50mm long)
Print instructions
- Print Base and Screw from PETG
- Print the four feets with FLEX/TPU material
Assembly
- Nothing special