Asterix and Obelix Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Asterix and Obelix Logo. This logo can be used along with all my previous models to create a complete display.
- Rating
- 5 / 5
- Likes
- 83
- Downloads
- 314
- Makes
- 12
- Views
- 1,068
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This logo can be used along with all my previous Asterix and Obelix models to create a complete display.
The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.
Enjoy!
Print instructions
Start with a gold color and then color changes as follows:
layer height 1.8mm change to black
layer height 2.6mm change to blue
Layer height 3.4 change to red
Following are the filaments I used:
Gold: Hatchbox - PLA, Gold
Black: Devil Designs - PLA, Black
Blue: Devil Designs - PLA, Blue
Red: Hatchbox - PLA, True Red
I've included a Prusa Slicer 3MF file that I used for this print with the color changes needed for the main logo.
Included is also a zip of parts (excluding the base) that can be used with the MMU/AMS/Palette.