Stargate modified Chevron parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified parts from the Stargate with Iris 80cm model to allow easier printing and assembling
- Rating
- 5 / 5
- Likes
- 217
- Downloads
- 635
- Makes
- 4
- Views
- 7,001
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to be hollow so that I could use an LED behind it.
The files here can be printed with much less support needed. The chevron2_9 PT01 and PT02 can be printed without supports, but chevron4_9 PT01 and PT02 will still need supports. Also included are the pins used to align and connect the pieces together later.
The split chrevron2_9 pieces also allow you to add LEDs and insert the inner ring after all the other parts are assembled, just snapping PT02 over top at the end.
UPDATE 1/26/2024: I've uploaded the Arduino code I created, the dialing sequence MP3, and photos of my prototype circuit for anyone interested in using it: https://github.com/spradlinb/Stargate_3D
UPDATE 4/6/2024: I added the hollowed out support piece (ttt_-_gate_support_9th_Electronics) and edge piece with pass through hole for the power cable (ttt_-_gate7_1_6x2_Magnets_Power). Parts to fit the pass through: https://www.amazon.com/dp/B07XCNSM81 (power jack), https://www.amazon.com/gp/product/B018FHB0H6 (on/off switch).
Video of the final result:
The addressable LED lights I used are “Chasing Dream Full Color Twinkle Decorative” style, with wire that's much easier to manipulate than most: https://www.amazon.com/dp/B0BVZLWQ2T