1 / 12
Bambu Lab AMS (latest) shelf mount brackets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I was looking for a matching patern for the newest bottom grooves, one that is far enough from the wall that permits the lid to fully open.
Not finding it, I made this one.
There is no left or right, same on both sides
Measurement are:
Total lenght = 206.75 mm
The teeth front and back are =66 mm, and the middle one is 70.25 mm.
They are spaced by 2.25 mm
I suggest to keep them on the AMS while you screw them on the surface to have the perfect fit.
It could also be mounted on top of 2 squares without the piece of board if needed.
Happy printing.