Mohoo Sharpening System Accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wheel, tyres and a soft jaw for holding plane irons or chisel blades with a slight taper
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 1
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Tyres are for the original wheels and ensure the rollers don't slip, a mild quality of life improvement.
The wheels are a total replacement for the original metal wheels and should be printed with a random z seam. You do not need to print the tyres if you replace the original wheels.
The soft jaw allows the jig to hold a blade with a slight taper, such as a Japanese chisel. Make sure you keep an eye on the jaw creeping up as you tighten the jig.
The alternate soft jaw works better, however it will throw the angle out very slightly. As long as you always use the alternate jaw it doesn't matter too much.
To be printed in TPU, I used 95 shore.