Diaper Changing Station Bins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of interchangable bins and hooks to hang different containers off the side of a diaper changing table.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 528
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
We didn't have much space on top of our changing table. We had everything we needed on shelves underneath which became inconvenient quickly when changing a baby's diaper. I made a set of bins with hooks that could be interchanged. this allowed me to use the same bin models with different hooks for different locations.
The bins and hooks attach via a 5mm x 5mm hook with a little press fit spring on the half that is on the hook side to hold the hook on the bin while you are moving the bin around.
Examples were printed using CHEP's profile for 0.6mm nozzle and 0.44mm layers on an Ender 3 S1. I figured that was fine since these are purely functional prints in my house. I used organic/tree supports on the wipes bin. Everything else should print without supports.