Shotgun Shell Beer holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Big o'l Shotgun Shell for blasting beer into your body.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 234
- Makes
- 1
- Views
- 1,569
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
A big shotgun shell can cover.
Internal diameter is 66.3mm and 139mm tall to hold a beer can.
I didn't like getting cold, wet hands from the condensation on the tin so went looking for something cool to help out.
The Shogun Shell Vase by JLake3D was close to what I wanted so I did what I do and messed with someone else's model.
I'm printing the first draft now so I'll add any notes or make changes to the files as needed.
Edit,
It printed really well! I used a brim, including the inside, for the top part then glued both together. A little cleaning up with a fine file and it's ready for a nice cold tin.
The top section will print better if you flip it upside down. I'll get to that when I upload pictures of the finished print.
It's worth printing maybe 10mm of the “Beer ShotShell Top” file first, so you can check for a good fit on the cans you are going to be using. If It's too tight then you can scale both parts up by a couple of % in your slicer.