Dodecahedron - USB/SD/Micro-SD Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.51 – €4.29 net (excluding VAT)
For file: Dodecahedron - USB and SD card holder.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.90 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A compact and functional holder for all sorts of memory devices.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 134
- Makes
- 0
- Views
- 693
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
A compact and functional holder for all sorts of memory devices.
I was inspired by @3DHACKS's post (Cults). Although it was a bit big for me so I modelled a smaller version as scaling it would probably not work well with the holes.
It keeps the USB's mainly in one place for me and it looks good at the same time.
The overhangs are relatively steep but should not need support. This model can be scaled down slightly because the holes are not tolerance tight fit - I was worried about damaging the MicroSD cards if I made it too close.
0.4mm Nozzle
0.16mm Layer height
20% Infill
Z 45 x X 55 x Y 52 mm