OS Engine, OS 32 F-H Backplate and Exhaust Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Backplate and Exhaust gasket for a os32 f-h
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a gasket set for the OS Engine 32F-H. Im sure it works on other engines similar in size, but Im not sure which ones those are. I have made a .dxf file for laser cutting the gaskets, also I made .STL's for anyone wanting to print it. I test printed it to check fitablility. It fits great. Since these are expensive to get and harder to find, I decided to make one. If you need any help dont hesitate to reach out. I can design most gaskets with a good drawing. Ill be making more as time passes. I have a couple other engines.
I plan on making gasket out of oil paper, or some fiber gasket 1/64th. Im not a fan of RTV on backplate. With a proper gasket, there is no leaking and going lean, so the gasket is the way to go for me.
I printed it at 0.12mm it is 1mm thick. (Way to thick in my opinion) But it was for a test fit.
Happy Printing/Lasering should you decide!!
**UPDATE** I cut the gasket from cardstock and it fits perfectly
