Drybox/Bowdentube-Converter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.52 – €1.86 net (excluding VAT)
For file: Support_0.2mm_PLA_MK3S_1h45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.69 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Clip-on Converter from Drybox/Bowdentube-Filament feed to MK3S
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 44
- Makes
- 0
- Views
- 1,147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I wanted to connect a drybox to my MK3S+ and not modify the extruder to accept a bowdentube.
This adaptor should be a snug fit for the rods of the spool-holder, a bowden-tube fitting with M6 thread gets screwed into the back and filament then runs along the sloped surface to the extruder.
The support clips onto the top rail and prevents the actual guide from rotating if it slips on the rod.