1 / 4
Analog Poti Knob (e.g. for B10k)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A knob e.g. for the B10K analog poti (e.g. often used in Arduino projects).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 100
- Makes
- 0
- Views
- 405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A knob e.g. for the B10K analog poti (e.g. often used in Arduino projects).
→ Compatible with split shaft potentiometers with a 1 mm slot that locks the knob in place.
I hope you like the model! → Makes and Comments are very much appreciated :)
---
There are 2 variants.
- analog_poti_knob -> with arrow indicator on top
- analog_poti_knob_no_arrow -> without arrow indicator on top
---
The inner diameter of the cap to insert the poti is 6 mm.
The outer diameter of the cap is 30 mm.
The 1 mm bridge inside helps secure the split shaft of the potentiometer.
---
Supports:
Not needed
Layer height:
Any (Example: 0.2 mm)
Infill:
Any (Example: 30%)
Filament:
Any (Example: PLA)