NANO Temperature Tower Mk.52
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.10 net (excluding VAT)
For file: HEAT-TOWER-MK52_0.2mm_PLA_MK3S_6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A no-nonsense temperature tower to help you fine-tune a profile for your filament.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 122
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
A powerful nano-sized no-nonsense temp tower to help you fine-tune a profile for your filament. Inspect stringing artifacts from 230C (at the lowest layer) to 190C (at the highest layer).
* Uses only 150mm of filament - why waste perfectly good product?
* Takes under 6 minutes to complete - because time is money!
* 100% free under a liberal CC license - so you can remake it and share it however you want.
If you don't want to set up the tower yourself, I have included a fully configured Mk3S+ G-Code
Instructions;
Initial hot-end temp 220C
Layers and perimeters;
-perimeters; 1
-solid layers top; 1
-solid layers bottom; 1
-min shell thickness top; 0.2
-min shell thickness bottom 0.4
Infill; 0%
Supports; none
Add a height modification layer 24mm-25mm; Top solid layers;zero
Add custom g-code inserts as follows
| Layer 2 | M104 S230 |
| Layer 5 | M104 S220 |
| Layer 10 | M104 S210 |
| Layer 15 | M104 S200 |
| Layer 20 | M104 S190 |