Coleman 150 quart Cooler latch
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.56 – €1.91 net (excluding VAT)
For file: coleman cooler latch _1_0.1mm_PETG_MK3S_2h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 2.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Latch handle for a Coleman 150 quart cooler
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 49
- Makes
- 0
- Views
- 741
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Print as saved in .3mf file - prints well at .1mm layer height, supports on build plate only, 5 vertical shells
This is a replacement latch handle (the outer part) for a Coleman 150 quart cooler. That's the 5 day model - it is huge. My latch handle got mishandled and broke, so I measured up a replacement part using the unbroken handle as a guide. Good as new.
In order to use this part, you will have to pop the old latch handle out of the latch assembly - the plastic is flexible enough to gently pry/bend the part that holds the handle into the assemby, remove the old broken one, and slip the new one back in place.